S2000 at SRMS' Cars, Coffee, and Racing

DriftWarzz – Drifting Tech/Rulebook

2018 DRIFTWARZZ – Drifting Tech/Rulebook

    • Pit speed is 5mph.
    • Absolutely no burnouts, donuts or dangerous driving in the pits. This will be grounds for immediate ejection from the event.
    • Pit areas must be kept clean. There are tons of trash cans…..USE THEM!
    • No refunds will be given. Once you pay and enter, you are in. If your car breaks or doesn’t pass tech, you will not be issued a refund.
    • All used tires must be taken with you. A tire changing service may be available at select events. All used tires must be taken with you, or disposed of (for a fee) by the tire changing company. If tires are left behind, we will no longer offer this convenience for you.
    • Drivers meetings are MANDATORY! If you have not made prior arrangements with us, you not be allowed on track.
    • Pay attention to and respect the track workers and staff. If you have an issue, or see something unsafe or dangerous, please bring it to our attention immediately.
  • Classes
    • Solo (Beginners Class and Novice Class ) – Drivers who have just started drifting and need practice and instructional ride-alongs, and drivers who have proven themselves to have control of the car, who can make solid runs. Instructional ride-alongs are provided only by Advanced class drivers that DriftWarzz has approved.
    • Intermediate: (Intermediate Class) – – Drivers who have proven themselves to have control of the car, drivers who can make mostly solid runs (spinning out on occasion). Also newly caged or caged drivers from other areas we need to evaluate for A class.
    • Tandem (Advanced Class) – Drivers who have proven themselves not only to have control of the car, but also to have control of their car when multiple cars are on the track at the same time. These drivers must have an approved roll cage installed in their car to be in this class. This is the only class permitted to have a single passenger.
    • ANOTHER note about classes: just because you have a cage, DOES NOT automatically put you in Advanced class, or mean you’re able to tandem at our events. If you’re a new driver, or from out of town with a cage, we will put you in Beginners or Novice class for a run group, so we can see you drive, and know that you’re not going to be endangering other drivers or yourself by running tandem. Please remember this isn’t a punishment, or a judgement. Honestly, we want to see EVERYONE running sick tandems with cages. we just need to know you’re up to it and can do it safely.

**DriftWarzz staff reserves the right to move a driver up or down in class as we feel is needed**








You will not be allowed on track until you have gone through tech. If you pull to the line without a check mark on your car, you will be asked to pull to the tech shed and will have to wait until an official has time to come tech your car. COME EARLY TO GET THROUGH TECH QUICKLY AND ONTO THE TRACK!

    • SA2010 or newer full faced helmet required. **DOT motorcycle helmets will NOT pass** Open face helmets are ONLY allowed with 4-point harnesses, and NOT allowed with stock belts.
    • Long pants, closed toe shoes and shirts required.
    • Fire extinguishers are mandatory for all cars. They must be securely mounted in a “quick release mount”, within reach of the driver while buckled in. These can be bought for less than $20 and are required.
    • No fluid leaks
    • If your engine has rod knock/is on the verge of death, you will not be allowed on track. If the knock/death sentence comes during the event, you will be asked to stop driving. WE DON’T WANT TO CLEAN UP OIL OFF THE TRACK!
    • Coolant overflow tank is mandatory
    • Oil Catch can is mandatory if you have modified your engine/intake/PCV. A COMPLETELY stock engine with factory PCV system intact will be allowed to run as-is.
    • Gas cap must be present and sealed.
    • If you have fuel cell instead of a stock tank, it must be top port (no bottom sump drag style cells), and it must be completely separated from the passenger compartment of the car by a sealed metal firewall.
    • All wiring should be insulated/covered/taped/NO COPPER SHOWING!
    • Battery must be TIGHTLY SECURED! No floppy batteries! (no zip ties, ratchet straps, or bungees)
    • Must have working headlights and taillights (night events)
    • Positive battery terminal must be covered
    • If battery is in the passenger compartment, it must be in a sealed box.
    • Brakes must work and have adequate pedal pressure
    • No excessive steering wheel/suspension play
    • welded/LSD/locking diff is HIGHLY recommended
    • Functioning handbrake HIGHLY recommended
    • ALL LOOSE ITEMS MUST BE REMOVED FROM CAR. If it is not bolted down, it needs to be removed from your car before driving.
    • Seats must be securely mounted
    • If harnesses are installed a harness bar must be installed. Harnesses MAY NOT be bolted directly to the floor. A strut tower bar is NOT a harness bar. if you need to know how to properly mount your harnesses, google it. there’s even pictures and stuff.
    • Lap AND Shoulder belt MUST be used
    • Seat belts/Harnesses must be used at all times.
    • Due to their design, we prefer stock belts with stock seats, and aftermarket harnesses with aftermarket seats.
    • Windshield must not have ANY cracks interfering with the driver’s view. small cracks are up to the discretion of the Tech official, but the general rule is if it touches your window frame in two places, it will NOT pass tech.
    • Tow straps are HIGHLY recommended. Factory tow hooks are accepted, but tow straps will be much safer for towing your car. It’s not our fault if you aero gets ripped off pulling you out of the weeds.
    • Hood and trunk must be securely latched with OEM latches or pins.
    • Please secure your aero appropriately, or just take it off. We don’t want to have to go get your bumper or side skirt after every run.
  • Roll Cage
    • All roll cages will be thoroughly inspected.
    • All Convertibles must have a 4-point Roll Bar. Miata 2 point “style bars” do not qualify.
    • minimum 6 point roll cage with harness and door bars is required for tandem
    • Roll cage must have x or double horizontal bars on both front doors for tandem
    • 98% of Bolt in roll cages (basic Cusco, god speed, ebay, etc) are NOT allowed for tandem driving. the ONLY exceptions are Safety 21 or Autopower, if installed correctly, and modified for double door bars. if door bars are removable and not fully welded in, they must be slip joint style, not flanged.
    • must be double plated at all chassis mounting points, and use proper grade 8 or above rated hardware. All roll cages will be thoroughly inspected, especially bolt ins.

Roll cage padding is required anywhere the drivers head can impact the cage.

Driftwarzz is coming to Homestead Speedway 12/8!

DriftWarzz is coming to Homestead Speedway for single and tandem drifting on the infield course on 12/8/18! We will be releasing more details and opening registration soon for this event!